Nav Detail Window; Dme Detail Window; Figure 3-7 Vhf Nav Detail Window; Figure 3-8 Dme Detail Window - Honeywell BENDIX/KING KTR 2280 System Installation Manual

n
KTR 2280 Preliminary H 08/17/06

3.2.4 NAV DETAIL WINDOW

The NAV detail window will be displayed when the cursor focus is on the NAV tuning
sub-window and the DETAIL button is pressed on either the PFD or MF Controller.

FIGURE 3-7 VHF NAV DETAIL WINDOW

The NAV mode selections (BRG, RAD and STBY) and access to the DME detail window
are shown in the NAV detail window. The active modes are shown with a large font in
white, and the inactive modes are shown with a smaller font in cyan.

3.2.5 DME DETAIL WINDOW

The DME detail window will be displayed when the cursor focus is on the NAV tuning
sub-window and the DETAIL button is pressed on either the PFD or MF Controller, when
the DME button is pressed on the PFD Controller or by selecting the "Go To DME Detail"
soft key on the NAV detail window.

FIGURE 3-8 DME DETAIL WINDOW

Rev. 0, Aug/2006 Page 3-6
©Honeywell International Inc. Do not print without express permission of Honeywell