Specifications; Important Safety Instructions - Makita EN410MP Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Dimensions (L x W x H)
Net weight
Effective cutting length
Gear ratio
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
Approved power unit
WARNING:
Never use the attachment with non-approved
power unit. Non-approved combination may cause serious injury.
This attachment is approved to use only with the following power
unit(s):
• (Multi Function Power Head)
EX2650LH
• (Cordless Multi Function Power Head)
BUX360, BUX361, BUX362, UX360D, UX361D, UX362D,
DUX60
Approved attachment
WARNING:
Never use a non-approved attachment. Non-
approved combination may cause serious injury.
This attachment is approved to use only with the following
attachment(s):
• (Shaft extension attachment)
LE400MP
Symbols
The following show the symbols used for the equipment. Be sure that
you understand their meaning before use.
Read and follow the instruction manual.
Take particular care and attention!
Forbidden!
Beware of electrical lines. Risk of electrical shock.
Beware of pinching.
Wear protective gloves.
Wear protective helmet, eye and ear protection.
Wear sturdy boots with non-slip soles.
Keep bystanders and animals at least 15 m (50 ft)
away from the power tool.
Keep the area of operation clear of all persons and
pets.
First aid
1,104 mm x 85 mm x 61 mm (43-1/2" x 3-3/8" x 2-3/8")
Intended use
This attachment is designed for only the purpose of trimming shrubs
and hedges in conjunction with an approved power unit. Never use
the attachment for the other purpose. Abusing the attachment may
cause serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V., Business address:
Jan-Baptist Vinkstraat 2 3070 Kortenberg BELGIUM. Authorize
Yasushi Fukaya for the compilation of the technical file and declare
under our sole responsibility that the product(s); Designation: Hedge
Trimmer Attachment. Designation of Type(s): EN410MP.
Fulfills all the relevant provisions of 2006/42/EC and also fulfills all
the relevant provisions of the following EC/EU Directives: 2000/14/EC
and are manufactured in accordance with the following Harmonised
Standards: EN ISO 10517:2009+A1:2013.
Place and date of declaration: Kortenberg, Belgium, 28.12.2015
Responsible person: Yasushi Fukaya, Director - Makita Europe
N.V.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
Read all safety warnings and all instructions
in this booklet and the instruction manual of the power unit.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
WARNING:
Save all warnings and instructions for future
reference.
The term "hedge trimmer" and "equipment" in the warnings and pre-
cautions refer to the combination of the attachment and the power
unit.
The term "motor" in the warnings and precautions refers to the engine
or electric motor of the power unit.
General precautions
1. Before starting the hedge trimmer, read this booklet and the
instruction manual of the power unit to become familiar with the
handling of the hedge trimmer.
2. Do not lend the attachment to a person with insufficient experi-
ence or knowledge regarding handling of hedge trimmers.
3. When lending the attachment, always attach this instruction
manual.
4. Do not allow children or young persons under 18 years old to use
the hedge trimmer. Keep them away from the hedge trimmer.
5. Handle the hedge trimmer with the utmost care and attention.
6. Never use the hedge trimmer after consuming alcohol or drugs,
or if feeling tired or ill.
7. Never attempt to modify the attachment.
8. Follow the regulations about handling of hedge trimmers in your
country.
Personal protective equipment
► Fig.1
1. Wear safety helmet, protective goggles and protective gloves to
protect yourself from flying debris or falling objects.
2. Wear ear protection such as ear muffs to prevent hearing loss.
3. Wear proper clothing and shoes for safe operation, such as a
work overall and sturdy, non-slip shoes. Do not wear loose cloth-
ing or jewelry. Loose clothes, jewelry or long hair can be caught
in moving parts.
4 ENGLISH
EN410MP
2.0 kg (4.5 lbs)
490 mm (19-1/4")
1 : 4.7