Makita DFR452 Instruction Manual page 7

Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Fig.3
► 1 . Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Lighted Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
1
2
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
Setting for desired screw lengths
For model DFR452
The tool provides 4 positive-lock screw length settings.
Slide the stopper base out and in while depressing the
levers on the top surface of the stopper base so the
number for desired screw length (indicated on the label)
appears in the reading window. See the following table
for details on the numbers allocated to your desired
screw lengths.
2
1
Fig.4
► 1 . Stopper base 2. Levers 3. Label 4. Reading
window
Numbers indicated on
the label
20
25
32
41
For model DFR551
The tool provides 7 positive-lock screw length settings.
Slide the stopper base out and in while depressing the
levers on the top surface of the stopper base so the
number for desired screw length (indicated on the label)
appears in the reading window. See the following table
for details on the numbers allocated to your desired
screw lengths.
2
1
Fig.5
► 1 . Stopper base 2. Levers 3. Label 4. Reading
window
7 ENGLISH
3
4
Screw length ranges
20 mm (3/4")
25 mm - 28 mm (1" - 1-1/8")
28 mm - 35 mm (1-1/8" - 1-3/8")
35 mm - 41 mm (1-3/8" - 1-5/8")
3
4