Canon DR-S130 User Manual page 86

D When specifying the scanning conditions of the back, configure the
settings in the same way as described in B to C. In this case,
specify [Stream count of Back], and then set the scanning
conditions for each of [Back 1st] to [Back 3rd].
Hint
The following shows the setting conditions that can be set in the
multistream settings.
Tab Items that can be set
[Color mode] and [Dots per inch]
[Basic] tab
(excluding [Auto-detection] for both)
[Brightness] tab [Brightness] and [Contrast]
[Color drop-out] and [Character
[Image processing] tab
Emphasis]
[Image control] tab [Edge emphasis]
[Feeding] Tab None (all disabled)
[Error Detection] tab None (all disabled)
[Others] Tab None (only [Use MultiStream] is enabled)
To scan barcodes
Click the [Barcode] button on the [Others] tab to configure barcode
scanning conditions.
See Help for details about settings.
86