Canon DR-S130 User Manual page 108

3
Wipe any dirt off the scanning glass.
Wipe any dirt off the scanning glass with a cloth that has been
dampened with water and thoroughly wrung out, and then wipe
the glass dry with a clean, dry and soft cloth.
CAUTION
Do not spray water or neutral detergent directly on the scanner.
Precision mechanisms, such as the light source, may get wet,
and cause a malfunction.
IMPORTANT
• Scratches on the sensor glass may cause marks on the images,
as well as feeding errors. If there are scratches on the sensor
glass, contact your local authorized Canon dealer or service
representative.
• Take care to ensure the anti-static brush in the front unit does
not become deformed.
Scanning Glass
108
4
Clean the rollers.
Clean the rollers while turning them.
Wipe the rollers with a cloth that has been dampened with water
and thoroughly wrung out, and then use a clean, dry and soft cloth
to wipe away any moisture.
Anti-Static brush
Rollers