Basic Operations: Various Scanning Operations Using A Computer (Captureontouch); Starting And Exiting Captureontouch - Canon DR-S130 User Manual

Basic Operations: Various Scanning Operations Using a Computer
(CaptureOnTouch)

Starting and Exiting CaptureOnTouch

By default, CaptureOnTouch becomes resident in the
system when you start your computer.
Double-click in the taskbar to start CaptureOnTouch and display
the main window.
Hint
You can also start CaptureOnTouch from the Start menu. Click [Start]
- [CaptureOnTouch] - [CaptureOnTouch V4 Pro].
Click (CaptureOnTouch icon) in the menu bar and then click
[Launch CaptureOnTouch] from the menu which appears to start
CaptureOnTouch and display the main window.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click at
window. This closes the window, but CaptureOnTouch will continue to
reside in the system.
To quit the CaptureOnTouch application, click
select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the
icon disappears from the taskbar.
To close the CaptureOnTouch window, click
window. This closes the window, but CaptureOnTouch will continue to
reside in the system.
Click
from the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the
the top of the
system, use one of the following procedures to restart it.
CaptureOnTouch will start and become resident in the system again.
in the taskbar, and
• Click [Start] - [CaptureOnTouch] - [CaptureOnTouch V4 Pro].
52
(CaptureOnTouch icon) in the menu bar, and select [Exit]
at the top of the