Loading Passports - Canon DR-S130 User Manual

Loading passports

To scan a passport, insert the passport into the separately sold carrier
sheet (for passports) and then place it onto the scanner.
1
Set the scanning conditions.
2
Set the Feed Selection Lever to Bypass Mode.
CAUTION
When scanning passports, make sure to set the Feed Selection
Lever to Bypass Mode.
3
Open the page of the passport that you want to scan.
Insert the passport into the carrier sheet so that the
thicker side is positioned as close as possible to the
sealed end.
4
Load the document with the sealed end of the carrier
sheet as the leading edge and the page you want to scan
facing down.
After placing the document, align the document guides with both
edges of the document.
CAUTION
• If the carrier sheet or passport is not loaded properly, you may
get a document jam or not get a scan image as intended.
• When scanning passports, clear the [Detect by Ultrasonic]
check box in the [Error Detection] tab on the scanner driver
settings screen. (See p. 40)
36