Canon DR-S130 User Manual page 27

• Scanning the following types of documents can cause a paper jam
or malfunction. To scan such a document, make a photocopy of the
document and then scan the photocopy.
There are creases or
fold lines.
There are curls.
There are tears.
There are clips or
staples.
Business Card
Size: 50 mm x 85 mm (2" x 3.35") or larger
2
Paper thickness: 380 g/m
smaller
IMPORTANT
If a stack of business cards cannot be fed properly, reduce the
number of cards in the stack.
Card (plastic)
Size: 54 mm x 86 mm (2.12" x 3.37") (ISO standard)
Card thickness: 1.4 mm (0.055") or smaller
Orientation: Horizontal feeding only
Embossed cards can be scanned.
Loading capacity: 3 cards (non-embossed), 1 card (embossed)
CAUTION
• When scanning cards, place them to be fed horizontally. If you
place cards to be fed vertically, they may not be ejected properly,
and cards that get jammed may be damaged when you remove
them.
• Embossed cards may not be able to be scanned correctly,
depending on the type of embossment.
• When scanning cards, clear the [Detect by Ultrasonic] check box
in the [Error Detection] tab on the scanner driver settings screen.
(See p. 40)
Carbon paper
The surface is coated.
Extremely thin document
such as semi-transparent
thin paper.
Documents with excessive
paper dust particles.
(80 lb bond) 0.45 mm (0.0177") or
Passport
Size: 88 mm x 125 mm (3.464" x 4.921") (ISO standard)
Insert the passport into the separately sold carrier sheet (passport
type) in an opened state.
Thickness: 4 mm (0.157") or less (including carrier sheet)
27