Canon DR-S130 User Manual page 39

3
Click the [Long Document Mode] tab and specify the
Long mode.
Depending on the length of the document, select [Long Document
Mode (1000 mm)] or [Long Document Mode (3000 mm)].
4
Click the [OK] button to close the settings screen.
Hint
When you set the Long mode, [(Long Document)] will be
displayed in [Page Size] in the [Basic] tab.
IMPORTANT
When scanning documents with [Long Document Mode (3000 mm)]
selected on the [Long Document Mode] tab, the image may not be
scanned completely if 400 dpi or 600 dpi is selected, or if [Color] is
selected for [Color mode] and [Duplex] is selected for [Scanning
Side]. If this happens, select a lower dpi, or select [Monochrome] for
[Color mode] or [Simplex] for [Scanning Side] and scan the
document.
1
Open the scanner driver settings screen.
2
Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3
Click [Maintenance].
The [Maintenance] dialog box appears.
39
(See p. 72)