Restart The Terminal; Reset The Terminal - Honeywell Dolphin 75e Quick Start Manual

To move files between your terminal and computer without using the an app:
1. Connect the terminal to the computer using the USB charge/
communication cable.
2. Depending on the Windows operating system either open File Explorer
or Windows Explorer.
3. Under Computer, click on Windows Embedded Handheld > Phone.
4. You can copy, delete and/or move files or folders between the PC and
the terminal or the microSD card installed in the terminal as you would
with any other storage drive (e.g., cut and paste or drag and drop).

Restart the Terminal

You may need to restart the terminal to correct conditions where an applica-
tion stops responding to the system or the terminal seems to be locked up.
• Press and hold the Power button
power off" appears, release the button and swipe down toward the bottom
of the screen. Press the Power button
To perform a restart if the touch panel display is unresponsive:
• Press and hold the Power
The terminal automatically restarts.

Reset the Terminal

For information on how to perform at Factory Reset (Clean Boot), see the
user's guide.
. When the message, "slide down to
to turn the terminal back on.
button down for approximately 13 seconds.