Touchscreen Buttons / Icons; Gauge Screen - Polaris RZR XP 1000 2017 Service Manual

Table of Contents

TOUCHSCREEN BUTTONS / ICONS

1. Press the Gauge button shown above to display the

main gauge screen.

2. Use the Gauge button again to move between gauge

and camera screens. These can also be selected with

the touch screen buttons in the lower left corner.

3. The grey buttons on the gauge screen are touch

selectable. Press on the "ODO" icon to toggle

between trip 1, trip 2, time traveled, total hours, and

total miles. To reset trip 1, 2 or time traveled, press

and hold this icon on whichever output you wish to

4. Pressing the MPH/RPM button will change whether

miles per hour or RPM is shown on top.

5. Press on the coolant icon to cycle to battery voltage,

and turbo boost pressure (if applicable), then back to

engine temperature.

6. Swipe down from the top of the screen or press the

upper navigation bar to adjust brightness and

Bluetooth connection.

Front and Rear Camera

Within the Gauge Menu is a front and rear view camera

as shown below. To toggle between camera views, press

the FRONT/REAR icon in the top left corner of the

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual