Table of Contents
Advertisement
FUEL SYSTEM
DIGITAL WRENCH® - DIAGNOSTIC
CONNECTOR
Located under the hood connected to a sealed plug
4.58
Follow these steps to connect the diagnostic interface
cable to the vehicle to allow Digital Wrench® use:
1. Assemble the SmartLink Module and attach the PC
q
.
Interface Cable to your laptop.
2. Remove the protective cap from the Digital Wrench®
connector.
3. Connect the Vehicle Interface Cable to the Digital
Wrench® diagnostic connector.
4. Turn the ignition key to the 'ON' position, select the
appropriate vehicle and wait for the status to display
'Connected' in the lower left corner of the screen.
5. Once
connected,
Wrench®.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
proceed
with
using
© Copyright Polaris Industries Inc.
Digital
Advertisement
Table of Contents
Troubleshooting
