Signal Input Settings (Input Menu); Making Phase Adjustment And Through Mode Settings - Sony MVS-6000 User Manual

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher >Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
The following functions are available here.
• Input Phase Adjust: Carry out phase adjustment for each primary input.
• Through Mode: Set through mode for the input side. This applies only to
• Video Process: Switch video processing on or off for each input signal, and
• Matte Illeg. Color Limit: Switch the illegal limiter on or off for the signal
• FC Adjust: Set the format converter inputs.

Making Phase Adjustment and Through Mode Settings

1
2
3
4
132

Signal Input Settings (Input Menu)

the primary inputs, and can be set independently for each primary input.
adjust the brightness, hue and so forth.
generated by the switcher internal matte generator.
In the Switcher >Input menu, select the input signal to which the settings
apply.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Src No
The selected input signal appears in reverse video.
Press [Input Phase Adj].
To adjust the phase, adjust the following parameter.
Knob Parameter
2 Phase
To enable through mode, press [Through Mode], turning it on.
Adjustment
Input signal selection
Adjustment
Input signal phase
Setting values
1 to 49
Setting values
–16 to +16