Setting The Format Converter Inputs - Sony MVS-6000 User Manual

Setting the Format Converter Inputs

Selecting the format converter inputs to be set (inputs 1 to 8)
1
2
Making detailed settings for up-conversion
1
2
3
4
134
Signal Input Settings (Input Menu)
Display the Switcher >Input >FC Adjust menu.
Using any of the following methods, select what the setting applies to.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Source No
In the Switcher >Input >FC Adjust menu, select the input to which the
setting applies.
Press [Format Converter], turning it on.
This enables format conversion.
In the <Conversion> group, select one of the following.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive: Automatically switching between the above two modes
When Adaptive is selected, adjust the following parameter.
Knob Parameter
2 Motion Select
a) 1: Still priority mode, 2: Standard mode, 3: Motion priority mode
In the <Aspect> group, select one of the following.
Edge Crop: Add black bars on the left and right sides of a 4:3 aspect ratio
image to convert it to a 16:9 image.
Letter Box: Crop the top and bottom of a 4:3 aspect ratio image to convert
it to a 16:9 image.
Squeeze: Stretch a 4:3 image horizontally to covert it to a 16:9 image.
Adjustment Setting values
Input selection 1 and upwards
Adjustment Setting values
Motion detection 1 to 3
sensitivity
a)