Making Dme Gpi Output Settings - Sony MVS-6000 User Manual

3

Making DME GPI Output Settings

Note
DME1 does not have a GPI output.
1
2
3
4
178
Interfacing With External Devices (Device Interface Menu)
To apply the selection made in step 2 when the input is high, press [H Set].
To apply the selection made in step 2 when the input is low, press [L Set].
This confirms the setting, which appears in the status area.
In the DME >Device Interface menu, press [DME2 GPI Output].
The DME2 GPI Output menu appears.
The output port selection is fixed at 1.
In the <Trigger Type> group, select the trigger polarity.
Status: Depending on the status, the relay contacts are closed or opened,
or the output is switched between high and low.
No Operation: The trigger has no effect on the relay state or output level.
Using any of the following methods, select the action you want to set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 Action
a) Error Make, Error Break, No Action
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
Adjustment
Action selection
Setting values
a)
1 to 3