Makita RP1802 Instruction Manual page 10

Fine adjusting function for positioning
blade in relation to straight guide
3
2
Fig.17
► 1. Thumb screw (A) 2. Thumb screw (B) 3. Scale ring
1. Loosen the thumb screw (A).
2. Turn the thumb screw (B) to adjust position (one
turn adjusts the position by 1 mm) as necessary.
3. Tighten the thumb screw (A) until it is secured.
Scale ring can be rotated separately, so scale unit can
be aligned to zero (0).
Adjusting guide shoe width
Loosen the screws marked by the circles to alter the
width of the straight guide. After altering width, tighten
the screws until they are secured.
Guide shoe width alteration range is 280 mm to 350 mm.
1
Fig.18
► 1. Screw
When set to minimum opening width
Fig.19
1
When set to maximum opening width
Fig.20
Templet guide
Optional accessory
The templet guide provides a sleeve through which the
router bit passes, allowing use of the router with templet
patterns.
Fig.21
1.
Pull the lock plate lever and insert the templet
guide.
1
Fig.22
► 1. Templet guide 2. Lock plate lever
10 ENGLISH
2