Assembling The Unit - Makita PDC1200 Instruction Manual

Low battery indication lamp of
Adapter for 36 V - 40 Vmax
Optional accessory
This adapter features the indication lamp that notifies
you of low or no battery capacity.
When the indication lamp is blinking, the remaining
battery capacity gets low.
When the indication lamp lights up, the battery capacity
is depleted or battery protection system is activated.
NOTE: When using the tool/machine continuously, tool/machine
may automatically stop without blinking the indication lamp.
NOTE: The timing when the indication lamp blinks varies
depending on the ambient temperature and battery status.
Fig.5
► 1. Low battery indication lamp
Using the adapter pocket
CAUTION:
Do not use this unit with the cord fixed
using the hook and loop fastener of the adapter pocket.
You can put the adapters into the adapter pocket as
shown in the figure.
Fig.6
► 1. Adapter 2. Adapter pocket
ASSEMBLY
switched off before carrying out any work on the
unit.

Assembling the unit

1.
harness assembly as shown in the figure.
1
Fig.7
► 1. Battery 2. Base plate
1
2
8 ENGLISH
CAUTION:
Always be sure that the unit is
Attach the battery to the base plate of the shoulder
1
2