Grizzly G0602Z Owner's Manual page 2

G0602Z/G0752Z Unique Parts
414
413
412
411
410
401
402
403
404
415
MODEL G0602Z
10" X 22" LATHE with DRO
Specifications
Motor: 1 HP, 110V, 1-Ph, 60 Hz
Full-Load Current Draw: 13.6A
Swing Over Bed: 9-1/2"
Swing Over Cross Slide: 6-1/8"
Distance Between Centers: 22"
Spindle Taper: MT#4
Spindle Bore: 1"
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/2" Date
Compound Travel: 3-1/2"
Leadscrew: 3/4" x 12 TPI
S/N
1001
Maximum Tool Bit Size: 1/2"
Weight: 330 lbs.
Mfd. for Grizzly in China
WARNING!
(G0602Z)
To reduce risk of serious personal injury while using this machine:
1. Read and understand owner's manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair,
roll up sleeves, and DO NOT wear loose clothing, gloves, or
jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with
slowest speed and stand to side of lathe until safe rotation
verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. Never leave lathe running unattended.
14. DO NOT reverse spindle rotation while spindle is moving.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or
alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
REF PART # DESCRIPTION
401 P0602Z401 BED
416 P0602Z416 Z-AXIS SENSOR BRACKET 31 X 31 X 600
417 P0602Z417 CAP SCREW M4-.7 X 10
418 P0602Z418 FLAT WASHER 4MM
902 P0602Z902 CROSS SLIDE
953 P0602Z953 X-AXIS SENSOR
954 P0602Z954 CAP SCREW M3-.5 X 16
955 P0602Z955 X-AXIS SENSOR MOUNTING PLATE
956 P0602Z956 CAP SCREW M4-.7 X 10
957 P0602Z957 FLAT WASHER 4MM
958 P0602Z958 PLASTIC SLEEVE 6 X 7 X 3D
959 P0602Z959 X-AXIS SENSOR BRACKET 10 X 30 X 215
-2-
409
416
405
407
408
406
909 908
911
910
912
914
915
907
913
916
939
966
REF PART #
960
961
962
963
964
965
966
967
1001 P0602Z1001 MACHINE ID LABEL (G0602Z)
1001 P0752Z1001 MACHINE ID LABEL (G0752Z)
1004 P0752Z1004 COMBINATION LABEL (G0752Z)
MODEL G0752Z
10" x 22" VARIABLE-SPEED LATHE
Specifications
Req. Power Supply: 110V, 15A, 60 Hz
Full-Load Current Rating: 12A
Motor: 1 HP, 220V, 3-Ph
Distance Between Centers: 22"
Swing Over Bed: 9-1/2"
Swing Over Cross Slide: 6-1/8"
Compound Travel: 3-1/2"
Cross Slide Travel: 6-1/2"
Spindle Type: Threaded, 1-3/4" x 8 TPI
Spindle Bore: 1"
Spindle Speed Range: 100–2000 RPM
Spindle Taper: MT#4
Tailstock Taper: MT#3
Max. Tool Bit Size: 1/2"
Weight: 330 lbs.
Date
S/N
Mfd. for Grizzly in China
1001
(G0752Z)
417
418
920
903
904
905
906
965
X
Y
Z
935
938
934
932 931
933
917
936
937
901
929
927
928
DESCRIPTION
P0602Z960 FLAT WASHER 3MM
P0602Z961 CAP SCREW M3-.5 X 6
P0602Z962 WIRE RETAINING RING 4MM
P0602Z963 Z-AXIS SENSOR
P0602Z964 Z-AXIS SENSOR MOUNTING PLATE
P0602Z965 DIGITAL READOUT DISPLAY UNIT
P0602Z966 DRO POWER CORD 2W 18G 72" 1-15P
P0602Z967 Z-AXIS SENSOR CONNECTING PLATE
Model G0602Z/G0752Z (Mfd. Since 06/17)
G0752Z
WARNING!
SPINDLE SPEED
RPM
L 100
M 160
H 250
M H
L
MOTOR
SPINDLE
WARNING!
To reduce risk of death
EYE/FACE INJURY
or serious injury, read
HAZARD!
manual BEFORE using Always wear
machine. ANSI-approved safety
To get a new manual, glasses and face shield
call (800) 523-4777 or when using this
go to www.grizzly.com. machine.
START STOP FWD
1004
919
902
959
960
961
921
922
918
923
924
925
ze
ro
926
ze
ro
ze
in ro
m m
m m
in ch
957
958 956
964
967
935
934
962
963
954
933
958
954
955
931
953
932
930 957
956
RPM
L 800
M 1300
H 2000
REV