Use Wps To Connect To The Mobile Router Wifi Network; Use Wps From The Touch Screen; Use Wps From The Netgear Mobile App - NETGEAR Nighthawk M2 MR2100 User Manual

Your settings are saved.
When you change your profile options (including disabling or enabling either WiFi
network), any devices connected to the mobile router are disconnected and might
need to be reconnected.
Use WPS to Connect to the Mobile Router
WiFi Network
To connect to the mobile router WiFi network, you can find the network and connect
or you can use WPS. If the device is WPS enabled, you can use the WPS method to
connect the device without using the WiFi password.

Use WPS From the Touch Screen

1. To wake the device, press the Power button.
2. Tap the Home button.
3. Tap WPS.
4. Within two minutes, tap Start WPS.
Your mobile hotspot and the WiFi device communicate and establish the connection.

Use WPS From the NETGEAR Mobile App

To add a WPS-enabled WiFi device from the NETGEAR Mobile app:
1. On your smartphone, connect to the mobile router's WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
WiFi.
4. Tap
The WiFi page displays.
5. Tap WPS.
6. Within two minutes, tap or click the WPS button on the mobile device or computer
that you want to connect.
Your mobile router and the mobile device or computer communicate and establish
the connection.
Specify Mobile Router Network
Settings
Nighthawk M2 Model MR2100
58 User Manual