Factory Reset From A Web Browser; Factory Reset Using The Reset Button - NETGEAR Nighthawk M2 MR2100 User Manual

7. After the device resets, reconnect WiFi devices.

Factory Reset From a Web Browser

To perform a factory reset:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Administration > Factory Reset.
The Factory Reset page displays.
5. Click the Factory Reset button.
6. When prompted, click the Yes button to confirm.
The mobile router resets and returns to its factory settings.

Factory Reset Using the Reset Button

You must remove the cover on the bottom of the mobile router to access the Reset
button.
To perform a factory reset using the Reset button:
1. Make sure that the mobile router LED is lit to indicate that it is receiving power from
the battery.
2. Remove the cover on the bottom of the mobile router.
3. Place your thumbs on the arrows on the cover and press down while sliding the
cover up.
4. Leave the battery in place.
Manage Your Mobile Router
Network
Nighthawk M2 Model MR2100
80 User Manual