Table of Contents
Advertisement
The dashboard displays.
4.
Select Settings > Setup > Wireless.
The Wireless Network page displays the settings for the 2.4 GHz and the 5 GHz WiFi
bands and global WiFi settings.
5.
Change the settings as needed.
By default, the Broadcast WiFi Name SSID check box is selected for each network so
that the WiFi network name displays in the list of WiFi networks for computers or mobile
devices.
6.
To change the global WiFi settings, adjust the WiFi standby time or the WiFi range.
7.
Click the Apply button.
Your settings are saved.
When you change your profile options (including disabling or enabling either WiFi
network), any devices connected to the mobile router are disconnected and might need
to be reconnected.
Use WPS to Connect to the Mobile Router WiFi Network
To connect to the mobile router WiFi network, you can find the network and connect or you
can use WPS. If the device is WPS enabled, you can use the WPS method to connect the
device without using the WiFi password.
Use WPS From the NETGEAR Mobile App
To add a WPS-enabled WiFi device from the NETGEAR Mobile app:
1.
On your smartphone, connect to the mobile router's WiFi network.
2.
Launch the NETGEAR Mobile app.
3.
Swipe down.
The dashboard displays.
4.
Tap
WiFi.
The WiFi page displays.
5.
Tap WPS.
6.
Within two minutes, tap or click the WPS button on the mobile device or computer that you
want to connect.
Your mobile router and the mobile device or computer communicate and establish the
connection.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Specify Mobile Router Network Settings
49
Advertisement
Table of Contents
