Access Control; Set Up Access Control From The Touch Screen; Set Up Access Control From The Netgear Mobile App - NETGEAR Nighthawk M2 MR2100 User Manual

Access Control

You can use access control to set up a list of devices to be blocked from accessing the
mobile router or to be allowed access.

Set Up Access Control From the Touch Screen

Using the Touch Screen, you can block the connected devices:
1. Tap Devices.
2. On the list of Devices, tap a device name.
3. Tap Block Device.

Set Up Access Control From the NETGEAR Mobile App

To set up access control:
1. On your smartphone, connect to the mobile router's WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
Devices.
4. Tap
The Devices page displays.
5. Tap Block List or Allow List.
Depending on your selection, the page displays an Allow List or a Block List.
6. To turn blocking on or off, tap the Block all in list slider.
7. To turn an allow list on or off, tap the Allow only in list slider.
8. To add a device to the list, tap + and select the device.
The device is added to the list.
9. To remove a device from the list, select the device and then tap the trash can.
The device is removed from the list.
Control Internet Access
Nighthawk M2 Model MR2100
44 User Manual