Table of Contents
Advertisement
Settings
4. Tap
5. Tap Firmware.
The Firmware page displays.
6. Tap CHECK FOR UPDATE.
The mobile router checks for firmware updates. If an updated is available, it is
automatically downloaded.
7. Tap INSTALL UPDATE.
After the update install completes, a success message displays.
Update the Firmware From the Web Page
To update firmware using the mobile router web page:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays. If a firmware update is available, a blue INSTALL NEW
FIRMWARE link displays on the right.
4. Click the INSTALL NEW FIRMWARE link.
The update downloads.
5. Follow the onscreen instructions to install the update.
After the update completes, the mobile router reboots.
Change the admin Password
The admin password is used to log in to the mobile router with the user name admin.
This password is not the one that you use for WiFi access.
When you used the NETGEAR Mobile app to set up the mobile router, you changed
the admin password. To change it again, you must use web browser access from a
computer. The ideal password contains no dictionary words from any language and
contains uppercase and lowercase letters, numbers, and symbols.
Manage Your Mobile Router
Network
Nighthawk M2 Model MR2100
74
User Manual
Advertisement
Table of Contents
