Tethered Connection; Use The Touch Screen To Access The Mobile Router; Use The Netgear Mobile App To Access The Mobile Router - NETGEAR Nighthawk M2 MR2100 User Manual

Tethered Connection

To connect the mobile router to the USB port on your computer:
Attach one end of the USB (type C) cable to the mobile router and plug the other
end into the USB port on your computer.
Your computer automatically connects to the mobile router LAN (local area network).
The first time you connect this way, your computer might display notifications about
detecting a new device.
Note: If you want to use data offloading with a tethered USB connection, use WiFi
offloading instead of Ethernet offloading. Tethered USB access is not supported
during Ethernet offloading. For more information about offloading, see Offload Your
Mobile Internet Connection on page 36.
Use the Touch Screen to Access the Mobile
Router
The first time you start the mobile router, you can set the admin password using the
Touch Screen or access the mobile router directly.
Use the NETGEAR Mobile App to Access the
Mobile Router
You use the NETGEAR Mobile app to set up the mobile router. After initial setup, you
can launch the app again and use it to log in to the mobile router to view or change its
settings.
Connect to the Mobile Router
Nighthawk M2 Model MR2100
21 User Manual