Table of Contents
Advertisement
Connect Using WPS
You can add a WPS-enabled computer or device to your Wi-Fi network without a Wi-Fi
password.
To connect to the Jetpack Wi-Fi network using the device's WPS button:
1.
Verify the Jetpack is powered on.
2.
Open the Wi-Fi Name/Password menu
3.
Select the main network or the guest network.
4.
When prompted, select Start.
5.
Within 2 minutes, press the WPS button on your computer or Wi-Fi device.
The computer or Wi-Fi device connects to the Jetpack Wi-Fi network.
Configure a Tethered Connection
Your Jetpack supports a direct connection through a USB cable to a Windows or Mac
computer. (This is commonly referred to as a "tethered" connection.)
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Use Your Jetpack
21
and select Wi-Fi Protected Setup.
Advertisement
Table of Contents
