Makita DF0300 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Drill
  5. DF0300
  6. Instruction manual

Makita DF0300 Instruction Manual

Driver drill
Hide thumbs Also See for DF0300:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Driver Drill
DF0300
Read before use.
DOUBLE INSULATION

Advertisement

Table of Contents
loading

Related Manuals for Makita DF0300

Summary of Contents for Makita DF0300

  • Page 1 INSTRUCTION MANUAL Driver Drill DF0300 Read before use. DOUBLE INSULATION...

  • Page 2: Specifications

    SPECIFICATIONS Model: DF0300 Drilling capacities Steel 10 mm Wood 28 mm Fastening capacities Wood screw 5.1 mm x 63 mm Machine screw No load speed (RPM) High (2) 0 - 1,500 min Low (1) 0 - 450 min Overall length...

  • Page 3: Ec Declaration Of Conformity

    When operating a power tool outdoors, use an WARNING: The vibration emission during actual extension cord suitable for outdoor use. Use of use of the power tool can differ from the declared val- a cord suitable for outdoor use reduces the risk of ue(s) depending on the ways in which the tool is used electric shock.
  • Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and chang- ing accessories. Driver drill safety warnings Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact...

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: Always check the direction of rotation before operation. DESCRIPTION CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam- CAUTION: Always be sure that the tool is age the tool.

  • Page 6: Installing Hook

    Adjusting the fastening torque ► 1 . Adjusting ring 2. Graduation 3. marking 4. Arrow The fastening torque can be adjusted in 21 levels by turning the adjusting ring. Align the graduations with the arrow on the tool body. You can get the minimum fastening torque at 1 and maximum torque at marking. The clutch will slip at various torque levels when set at the number 1 to 20. The clutch does not work at marking.

  • Page 7: Screwdriving Operation

    The hook is convenient for temporarily hanging the tool. Screwdriving operation This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool housing on CAUTION: either side and then secure it with a screw. To remove, Adjust the adjusting ring to the loosen the screw and then take it out.

  • Page 8: Maintenance

    CAUTION: perform inspection or maintenance. These accessories or attachments are recommended for use with your Makita tool NOTICE: Never use gasoline, benzine, thinner, specified in this manual. The use of any other alcohol or the like. Discoloration, deformation or accessories or attachments might present a risk of cracks may result.
  • Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885729-223 www.makita.com 20190419...

Table of Contents