Splitting Conference Calls; Ending Conference Calls - Cisco SPA 303 Manual

call on hold by pressing confLx on the display. The confLx function is
only available if you have only two calls on your phone.
To join two calls with yourself:
1. Have one call on hold while talking to another
2. Press > on the arrow pad and then press c onf Lx . You will then be
connected to both callers.
Splitting Joined Calls
After you have joined two calls, you may split those calls back to their
individual calls.
To split a Joined call:
Press the hold soft key to split the joined calls.
All calls are split into individual calls and put on hold.
Setting Up Conference Calls
You may conference up to two calls plus yourself (a 3-way call).
To set up a conference call:
1. Call the first party.
2. Press the conf to create a new call.
All conference participants hear the dial tone and ring back when
the conference host places a call to a new party.
Note
3. Call the second party. You must press the conf soft key again to join
both callers.

Splitting Conference Calls

After you have created a conference call, you may split those calls back
to their individual calls.
To split a conference call:
Press hold soft key to split the conference.
All calls are split into individual calls and put on hold.

Ending Conference Calls

To end a conference call:
20