Ending Calls; Forwarding Calls; Static Forwarding - Cisco SPA 303 Manual

Ending Calls

To end a call:
Do one of the following:
•If you are using the handset, Press the Line key to right of the display or
replace the handset.
•If you are using a headset, press
•If you are using the speakerphone, press

Forwarding Calls

You can configure your phone so that all incoming calls are forwarded to
another party (refer to Static Forwarding).
All incoming calls can be forwarded to voicemail while Do Not Disturb is
enabled on your phone.

Static Forwarding

Static Forwarding allows you to send ALL incoming call to another phone
number or extension. When Static Forwarding is enabled, your phone will
not ring.
To forward ALL incoming calls to another party:
1. From the idle display, Press the cfwd soft key on the main display.
2. Enter the number you would like all calls to forward to.
You may also change the Forwarding setting by going into the menu
Go to option 6 Call Forwarding
•
CFWD All Number — to forward All incoming calls
•
CFWD No Ans Number — To forward unanswered incoming call
•
CFWD Busy Number —To forward calls that arrive when you are
already on a call
3. Depending on your selection:
a. If you selected All, enter a number, or extension number, to
.
17
.
,