Conformance; Important Safety Instructions - Cisco SPA 303 Manual

IMPORTANT
CONFORMANCE INFORMATION FOR IP
PBX BASE UNIT AND DESKPHONES

Conformance

This equipment is designed for use in the United States.
This equipment complies with the following standards:
FCC Part 15, Subparts B, C, D
FCC Part 68
UL60950
Analog extension ports: TNV3
CO port: TNV3
ADSL port: TNV3
Power fail port TNV3
LAN/WAN ports SELV

Important Safety instructions

The following safety information is reprinted from IEC60950.
•
When using your telephone equipment,
should always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on the product.
•
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
•
Do not use this product near water (for example, in a wet basement).
•
Do not place this product on an unstable cart, stand, or table. The
product can fall, causing serious damage to the product.
•
Slots and openings in the cabinet and the back or bottom are provided
for ventilation, to protect it from overheating; these openings must not
be blocked or covered. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
•
This product should be operated only from the type of power source
indicated in the manual. If you are not sure of the type of power source
to your building, consult your dealer or local Power Company. The
power socket outlet must be located near the product and must be
easily accessible to allow plugging/unplugging.
•
Do not allow anything to rest on the power cord. Do not locate this
product where persons walking on it will abuse the cord.
•
Do not use an extension cord with this product's AC power cord. The
AC outlet for this product should not be used for any other electrical
equipment.
•
Never push objects of any kind into this product through cabinet slots
as they can touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
•
To reduce the risk of electric shock, do not disassemble this product,
but take it to a qualified serviceman when some service or repair work
is required. Opening or removing covers can expose you to
SAFETY
basic
51
AND
safety precautions