Binding The Evotouch Controller To The Hcw82 Room Adjuster/Sensor Or To The Hcf82 Room Sensor - Honeywell evohome Applications Manual

4.9 Binding the evotouch controller to the HCW82 room adjuster/sensor or to
the HCF82 room sensor
4.9.1 Binding procedure
f Follow the guided or expert configuration until the
following screen appears.
f Position the evotouch controller as close as possible
to the HCW82 / HCF82.
f Press and hold the bind button (1) on the HCF82 /
HCW82 for approx. 1 second.
Binding takes place automatically.
i
Binding is terminated automatically after 5 minutes.
42
1
2
evotouch