Honeywell evohome Applications Manual page 32

4.4.2 Checking RF communication
BDR91
The evotouch controller sends test signals to and from the
assigned relay module BDR91 in order to test the signal
strength.
i
The signal strength can be EXCELLENT, GOOD, POOR
or not received
HC60NG / R6660D
The evotouch controller sends test signals to the assigned
relay module HC60NG / R6660D in order to test the signal
strength.
When HC60NG / R6660D receives the test signal, the field
strength is indicated by flashing of the red LED.
1 pulse = sufficient
5 pulses = strong
Deactivating the RF communication check
f Press the NEXT button.
Completing configuration
f In the following screen press the DONE button.
Configuration of the relay module is completed.
32
evotouch