4.6.2
Checking RF communication
The evotouch controller sends test signals to the assigned
HM80 in order to test the signal strength.
When HM80 receives the test signal, the field strength is
indicated by flashing of the red LED (4).
1 pulse = sufficient
5 pulses = strong
Note
Sensor information relates to the sensor in the zone
controlled by the HM80.
Deactivating the RF communication check
f
Press the NEXT button.
Completing configuration
f
In the following screen press the DONE button.
Configuration of the HM80 mixing valve is completed.
36
evotouch