Project Planning Manual | Rexroth IndraDyn T
Overview of Connections
8.3.5
Terminal Box for Double-Cabling - Frame Size 530G / 530L
①
Total shield connection via cable clamp of strain relief in the screwed
cable connection
②
Connect the temperature sensor SNM.150.DK for motor protection on
the drive device
③
The temperature sensor KTY84-130 can be only used for external tem‐
peratue measuring
Fig.8-16:
Connection overview on the terminal box
The motor connection for the stator frame sizes 530G and 530L must be done
via two power cables.
The following connection diagram shows a possible connection.
When planning the double cabling, please note the applicable in‐
stallation regulations at the installation site of the machine.
Electric Drives
| Bosch Rexroth AG
and Controls
Connection Techniques
193/261