Raid System Configuration; Running The Lsi Software Raid Configuration Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
4.

RAID System Configuration

This section describes the RAID configuration utility, the LSI Software RAID Configuration Utility.
Because this utility resides in LSI Embedded MegaRAID, its operation is independent of the OS.
4.1

Running the LSI Software RAID Configuration Utility

When the message below appears on the POST screen after turning on the server, press the <Ctrl> +
<M> keys or <Enter> key. The LSI Software RAID Configuration Utility starts.
Press Ctrl-M or Enter to run LSI Software RAID Configuration Utility
*1: In the menu screen shown above, x of LSI Software RAID Configuration Utility Verx.xx indicates the
utility version.
*2: mm dd, yyyy indicates the date when the utility was created.
*3: z of BIOS Version z.zz.zzzzzzzz indicates the version of the LSI Software RAID BIOS.
Tips If you failed to perform key operation as described above and the following screen did not
appear, restart the server and retry.
LSI Software RAID Configuration Utility Ver x.xx mm dd, yyyy
BIOS Version z.zz.zzzzzzzzz
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Express5800/B120e-h Maintenance Guide
Configure VD(s)
4. RAID System Configuration
93