NEC Express5800 Series Maintenance Manual page 51

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 1 Maintenance
window is highlighted in red, and "Abnormal End" is displayed in the result on the right side.
Move the cursor to the test that detected the error, and press <Enter > key. Take notes about
the error message that has been output to the Detail Information screen and contact the store
where you purchased the product or the maintenance service company.
4.
Follow the guideline shown at the bottom of the screen, and press <Esc> key.
The Enduser Menu below is displayed.
<Test Result>
Shows the diagnostics completion screen of the above diagnostics.
<Device List>
Shows a list of connected devices.
<Log Info>
Shows the log information of the diagnostics. Log information can be saved.
To save it, connect a FAT formatted removable media, and then select [Save(F)].
<Option>
Optional features can be used from this menu.
<Reboot>
Reboots the hardware.
5.
Select Reboot in Enduser Menu.
The server restarts. Remove EXPRESSBUILDER DVD from the drive.
System Diagnostics is now completed.
Express5800/B120e-h Maintenance Guide
8. System Diagnostics
51

Advertisement

Table of Contents
loading

Table of Contents