Table of Contents
Advertisement
Figure 154. RAID super capacitor module holder removal
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.
Install the RAID super capacitor module on the chassis
Use this information to install the RAID super capacitor module on the chassis.
"Read the
installation
Guidelines" on
page 79
Before installing the RAID super capacitor module on the chassis, touch the static-protective package that
contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then,
take the new RAID super capacitor module out of the package and place it on a static-protective surface.
To install the RAID super capacitor module on the chassis, complete the following steps:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku:
http://list.youku.com/albumlist/show/id_52222446.html
Step 1.
If the server comes with a tray that covers the place of the RAID super capacitor module on the
chassis, remove it first.
ThinkSystem SR635 Maintenance Manual
170
"Power off
the server for
this task" on
page 11
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 82
Advertisement
Table of Contents
