Figure 76. Security bezel removal
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel
into place.
Install the security bezel
Use this information to install the security bezel.
"Read the
installation
Guidelines" on
page 79
Before installing the security bezel, if you have removed the rack latches, reinstall them. See "Install the rack
latches" on page 97.
To install the security bezel, complete the following steps:
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku:
http://list.youku.com/albumlist/show/id_52222446.html
Step 1.
If the key is held inside the security bezel, remove it out of the security bezel.
ThinkSystem SR635 Maintenance Manual
100