Remove The Raid Super Capacitor Module On; The Chassis - Lenovo ThinkSystem SR635 Maintenance Manual

After installing the super capacitor module:
1. Connect the super capacitor module to an adapter with the extension cable that comes with the super
capacitor module. See "Super capacitor cable routing" on page 69.
2. Complete the parts replacement. See "Complete the parts replacement" on page 203.
Remove the RAID super capacitor module on the chassis
Use this information to remove the RAID super capacitor module on the chassis.
"Read the
installation
Guidelines" on
page 79
Before removing the RAID super capacitor module on the chassis:
1. Remove the top cover. See "Remove the top cover" on page 89.
2. Disconnect the cable of the RAID super capacitor module.
To remove the RAID super capacitor module on the chassis, complete the following steps:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku:
http://list.youku.com/albumlist/show/id_52222446.html
Figure 153. Removal of the RAID super capacitor module on the chassis
Step 1. Open the retention clip on the holder of the RAID super capacitor module.
Step 2. Take the RAID super capacitor module out of the holder.
Step 3. Remove the RAID super capacitor module holder as shown if necessary.
"Power off
the server for
this task" on
page 11
Chapter 3
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 82
.
Hardware replacement procedures
169