Table of Contents
Advertisement
Figure 94. Configuration 1
Figure 95. Configuration 2
Figure 96. Configuration 3
There are three types of riser assembly configurations. The removing and installation procedure of the riser
card is similar for all types of riser assembly. The following procedures are based on the riser assembly in
configuration 1.
Remove a riser card
Use this information to remove a riser card.
"Read the
"Power off
"ATTENTION:
installation
the server for
Static Sensitive Device
Guidelines" on
this task" on
Ground package before opening"
page 79
page 11
on page 82
Before removing a riser card, remove the top cover. See "Remove the top cover" on page 89.
To remove a riser card, complete the following steps:
ThinkSystem SR635 Maintenance Manual
118
Advertisement
Table of Contents
