Advertisement
Fitting the Décor Door
3) Clasp the eyelet holes in
the rail on the inside of the
décor door over the bolts
protruding from the top edge
of the refrigerator door.
Secure these using the nut
caps provided, as shown in
the above illustration. Make
sure that you have the décor
door attached levelly before
proceeding to the lower
fastenings as shown on right.
1) Using a 2.8mm
diameter bit, make
holes sufficient to
attach the rail as
NOTE:
You need
shown on the left.
the tools
NOTE – door area
shown
here.
below the rail
must reach to just
below appliance.
2) Fix the hanging
rail onto the inside
of the décor door
using two 10mm
screws, centering it
so that 262mm of
its width is on either
side of the
imaginary vertical
middle line of the
décor door.
16
Hide quick links:
Advertisement
