Baumatic BR180SS Instruction Manual

Baumatic BR180SS Instruction Manual

315 litre combi fridge freezer

Advertisement

Quick Links

BR180SS/BR180W 315 Litre
combi fridge freezer
BR181SL 315 Litre combi fridge
freezer
d yo

Advertisement

Table of Contents
loading

Summary of Contents for Baumatic BR180SS

  • Page 1 BR180SS/BR180W 315 Litre combi fridge freezer BR181SL 315 Litre combi fridge freezer d yo...
  • Page 2 USER MANUAL FOR YOUR BAUMATIC BR180SS/W 315 Litre combi fridge freezer BR181SL 315 Litre combi fridge freezer NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
  • Page 3: Table Of Contents

    7 – 8 BR180SS/W BR181SL Description of the appliance 9 - 10 Description of the product features Using your Baumatic fridge freezer 11 - 12 Before switching on During first use Switching on the appliance and setting the thermostat 11 - 12...
  • Page 4: Environmental Note

    This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the...
  • Page 5: Important Safety Information

    Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.
  • Page 6 Do not place electrical devices inside of the appliance, such as mixers or ice cream makers. Service You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Baumatic Customer Care Department.
  • Page 7: Specifications Of Your Fridge Freezer

    Specifications of your fridge freezer BR180SS/W o Total gross/net capacity: 315/305 litres o Gross capacity (fridge/freezer): 215/100 litres o Net capacity (fridge/freezer): 209/96 litres o Energy efficiency class: A+ (0.74 kWh per 24 hours) o Freezer star rating: **** o Freezing capacity: 4.5 kg per 24 hours...
  • Page 8: Br181Sl

    BR181SL o Total gross/net capacity: 315/305 litres o Gross capacity (fridge/freezer): 215/100 litres o Net capacity (fridge/freezer): 209/96 litres o Energy efficiency class: A (0.82 kWh per 24 hours) o Freezer star rating: **** o Freezing capacity: 4.5 kg per 24 hours o Adjustable thermostat o Automatic defrost (fridge section only) o 3 x Adjustable safety glass shelves...
  • Page 9: Description Of The Appliance

    Description of the appliance 1) Top cover 2) Thermostat dial (and light) 3) Adjustable fridge shelves (x 3) 4) Salad crisper cover 5) Salad crisper 6) Upper freezer drawers 7) Lower freezer drawer 8) Adjustable feet (x 2) 9) Egg tray 10) Dairy shelf 11) Door shelves (x 2) 12) Bottle shelf...
  • Page 10: Description Of The Product Features

    Description of the product features 1) Adjustable fridge shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove.
  • Page 11: Using Your Baumatic Fridge Freezer

    Using your Baumatic fridge freezer Before switching on o Make sure that it has been installed by a suitably qualified person, information contained Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
  • Page 12: Switching On The Appliance And Setting The Thermostat

    Switching on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The thermostat dial is located on the right hand side of the fridge section. o The thermostat automatically regulates the temperature inside the fridge freezer, depending on what number you have turned the thermostat dial to.
  • Page 13: Arranging And Storing Food In The Fridge Section

    Arranging and storing food in the fridge section o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increase the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a strong flavour.
  • Page 14: The Freezer Section

    o Milk bottles should have a cap on them and be stored on the bottle shelf that sits in the door. o Garlic, potatoes, onions and bananas should only be stored in a refrigerator IF they are kept in airtight containers.
  • Page 15: Freezing Fresh Food

    Freezing fresh food o To freeze the maximum quantity of fresh food specified above, should turn thermostat dial to position <5>, 3 hours prior to attempting freezing. o For smaller quantities of fresh food, you should turn the thermostat dial to position <5>, approximately hour...
  • Page 16: Storing Commercially Frozen Food

    o If you are freezing liquid, then do not fill the container to the brim. Liquids will expand when being frozen. o Do not place bottles (glass or tin) containing liquids (especially sparkling liquids) into the freezer as they could cause bottle burst...
  • Page 17: Making Ice Cubes

    Making ice cubes o Fill the ice cube tray with water and place it in the upper freezer drawers (6). o After the water is completely frozen and turned to ice, you can twist the ice cube tray (as shown in the drawing below) to dispense the ice.
  • Page 18: Saving Energy When Using Your Fridge-Freezer

    Saving energy when using your fridge-freezer Installing: o Install the appliance in a cool position. If it is placed in direct sunlight or next to an oven or other heat source, the energy consumption can increase substantially. o Ensure the appliance is installed with the correct ventilation requirements.
  • Page 19: Cleaning And Maintenance

    o If you have a second appliance that is not used, make sure that it is stored with the power off and the door left ajar until it is actually required. Disposing: If you're going to throw out your old fridge, see if there's a chlorofluorocarbons (CFCs) recycler in your area.
  • Page 20: The Defrost Drain Hole

    The defrost drain hole o Defrosting occurs automatically in the refrigerator section during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The drain hole should be cleaned periodically with the drain hole cleaner. This will prevent water from collecting in the bottom of the refrigerator, instead of flowing down the defrost drainage channel and drain hole.
  • Page 21: Defrosting The Freezer Section

    Defrosting the freezer section The frost in the freezer section should be removed periodically. You can use a plastic scraper to keep down the amount of frost that builds. IMPORTANT: The freezer section should be defrosted at least twice a year.
  • Page 22: Replacing The Light Bulb

    o You should not attempt to freeze fresh food inside the freezer section until this 24 hour time period has elapsed. o Do not defrost the appliance with other electrical devices (e.g. hair dryer). Do not use sharp metal objects to remove the ice on the freezer, as this could cause damage to the refrigerant system.
  • Page 23: Installation

    Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the fridge section.
  • Page 24: Positioning

    o When the connection is completed, no stray strands or cut wire should be present. The cord clamp must be secured over the outer sheath. Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance.
  • Page 25: Attaching The Handle

    Attaching the handle o Take out the handle and screw covers from the accessory bag in the salad crisper drawer. o Close the door and remove the screws or hole cover installed on it. Both screws are on one side and the hole cover on the other. o Fasten the handle (3) with the self-tapping screws (2) on the side of the door (4) where it is to be installed.
  • Page 26: Reversing The Doors

    o Finally, refit the screw covers. Reversing the doors IMPORTANT: Make sure you have enough room to lean the appliance back at a 45° angle. Care should be taken not to damage or break the condenser coils on the rear of the fridge freezer. THE APPLIANCE MUST BE DISCONNECTED FROM THE POWER SUPPLY BEFORE COMMENCING THE DOOR REVERSAL PROCESS.
  • Page 27 When refitting hinges to the cabinet, you must ensure that the screws are fully tightened. However it is important that the screws are not over tightened. 1) Gently prise off the three plastic screw covers from the top cover, using a small flat-headed screwdriver. Then remove the screws from the front and back of the top cover, before taking it off.
  • Page 28 3) Gently prise off the plastic hinge covers at the top of the fridge door, using a small flat-headed screwdriver. One of the plastic hinge covers is small; this one will be reused later in the door reversal process. A larger plastic hinge cover will be supplied with the appliance separately and this should be used instead of the existing one.
  • Page 29 12) Unscrew the two screws that are fitted to the lower hinge holes on the left hand side of the cabinet. Then fit the lower hinge to the left hand side of the cabinet using the screws that you have just removed. 13) Carefully return the fridge freezer back to its upright position.
  • Page 30 18) The upper hinge needs to be rotated through 180 degrees from its original position, before being refitted to the opposite side of the cabinet. IMPORTANT: You must ensure that the hinge locates into the relevant hole in the fridge door. 19) Refit the top cover and then retighten the screws at the front and back of the top cover.
  • Page 31: Troubleshooting

    Troubleshooting IMPORTANT: If your fridge freezer appears not to be operating properly, before contacting the Baumatic Customer Care Department, please refer to the checklist below. My fridge freezer does not appear to be working/there is no power to my appliance.
  • Page 32 Ice has formed on the inner back wall of my fridge. o Check that food has not been pushed too far back inside the appliance, so that it is in contact with the inner back wall. o IMPORTANT: It is normal to get some ice droplets forming on the back wall of the appliance.
  • Page 33 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance.
  • Page 34: Contact Details

    United Kingdom Baumatic Ltd., Baumatic Buildings, Czech Republic 6 Bennet Road, Baumatic CR spol s.r.o. Reading, Berkshire Průmyslová zóna Sever 696 RG2 0QX 460 11 Liberec 11 United Kingdom Czech Republic Sales Telephone +420 483 577 200 (0118) 933 6900 Sales Fax www.baumatic.cz...
  • Page 36 36 36...

This manual is also suitable for:

Br180wBr181sl

Table of Contents