Reversing The Door - Baumatic BRLF1760W Instruction Manual

R eversing the door
You can choose whether the door will open from the left or the right to
suit your kitchen design or personal preference. The appliance is
supplied with the hinges installed on the right, however if you wish to
h ave the hinges on the left then please follow the instructions below.
o It is strongly recommended that two people carry out thi
procedure to avoid damage to the appliance or personal injury.
o Remove the upper hinge cover first.
o Remove the two screws that hold the upper hinge
hand side to the frame. Take away the upper hinge.
o Lift the door
scratching it.
o Remove the two screws t
Remove the lower hinge.
o Remove the left front leg and transfer it to the right hand side.
o Move the hole cover plate to the right hand side.
o Before replacing the lower hinge, remove the bolt-pin and
reverse the direction of the lower hinge. Then install the lower
hinge onto the left hand side of the lower frame with two screws.
o Insert the bolt-pin into the lower hinge.
o Set the door in po
the lower hinge.
o While holding the door in the closed position, secure the upper
hinge in the top frame of the left hand side with two screws. DO
NOT tighten the two s
with the counter top.
o Install the upper hinge cover on the upper hinge.
o Carefully tilt the appliance backwards and secure it properly.
o Unscrew the door hinge screws and remove the hinge pin
bracket. Open the door a little way and take it out downwards.
o Unscrew the upper pin and screw it into place o
side. Fit the door into the upper pin and close it.
and place it on a padded surface to prevent
hat hold the lower hinge in position.
sition making sure that the door is seated at
crews until the top of the door is levelled
s
on the right
n the opposite
18