Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BR16.2A
Summary of Contents for Baumatic BR16.2A
- Page 1 BR16.2A Built-in Larder Fridge...
- Page 2 User Manual for your BR16.2A BUILT-UNDER LARDER FRIDGE NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference.
-
Page 3: Table Of Contents
CONTENTS YOUR APPLIANCE’S SPECIFICATIONS …….…….3 SAFETY INFORMATION / ENVIRONMENTAL NOTE .. 4 USING YOUR FRIDGE……………….……………..…………5-8 YOUR BR16.2A FRIDGE …………………….………………….5 BEFORE USING YOUR FRIDGE…………….……………….…6 USING YOUR FRIDGE……………..……………………….…7-8 ARRANGING FOOD IN YOUR FRIDGE …………………9-10 NOTES ON USING YOUR FRIDGE ………………………….11 CLEANING AND MAINTENANCE……….………………12-13 DEFROSTING / TIPS FOR SAVING ENERGY…………14 INSTALLING YOUR FRIDGE……………………………...….15 FITTING THE DÉCOR DOOR …………………………...17-18... -
Page 4: Your Appliance's Specifications
Specifications of your BR16.2A Built-in fridge Congratulations on purchasing a Baumatic BR16.2A Built-under Fridge with icebox! Your Fridge has: Gross capacity: 146 litres Net capacity: 145 litres Energy efficiency class: A Automatic Fridge Defrost Adjustable Thermostat Egg Rack 3 Wire Shelves... -
Page 5: Safety Information / Environmental Note
Manufacturer declines all responsibility for any damage due to non- grounding of appliance. DURING THE GUARANTEE PERIOD ONLY BAUMATIC SERVICE ENGINEERS OR AN AUTHORISED AGENT OF • BAUMATIC SHOULD CARRY OUT REPAIRS ON THIS UNIT. DO NOT USE IF THE SUPPLY CORD IS DAMAGED. NEVER TAKE RISKS WITH FIRE! •... -
Page 6: Using Your Fridge
Using your Baumatic BR16.2A LARDER-FRIDGE Your BR16.2A Built-under Larder-Fridge: that this channel is never clogged. Use a plastic straw to clear away 1 SHELF: The shelves may be any dirt. placed in any of the guide slots 3 CRISPER TRAYS & SERVING TRAY... -
Page 7: Before Using Your Fridge
NOTE: BEFORE Using your BR16.2A LARDER-FRIDGE: UPON DELIVERY: When your Fridge has been delivered, you will need to wait approximately 2 hours before turning it on. The fluid of the compressor installed in the appliance will need time to settle. PLEASE DO NOT PLUG IN ANY EARLIER THAN THIS! NOTE: We recommend that you... -
Page 8: Using Your Fridge
USING your Baumatic BR16.2A FRIDGE YOU SWITCH ON YOUR APPLIANCE PLUGGING IT IN & SETTING THE THERMOSTAT inside the Fridge at the upper right- hand side: Your Fridge’s thermostat automatically regulates the inside temperature of the compartments. By rotating the thermostat knob from a low to a higher number position, colder temperatures can be obtained. - Page 9 USING your Baumatic BR16.2A LARDER-FRIDGE Reminder: Allow the unit time to settle after delivery. If your plug and power socket are now behind the fridge and you still need to move the unit into place, be especially careful. Remember to leave a safe distance between the back of the fridge and the wall or rear of the unit cabinet.
-
Page 10: Arranging Food In Your Fridge
ARRANGING FOOD IN YOUR FRIDGE • To reduce humidity and the consequent increase of frost, NEVER place liquids in unsealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of the evaporator. In time, the unit will need more frequent defrosting if too much humidity develops inside it. - Page 11 ARRANGING FOOD IN YOUR FRIDGE • DO NOT ALLOW anything to touch the refrigerator’s back wall as it will cause frost. Also, packaging, especially paper, can stick to it and spoil. • Crispy and delicate foods should be stored in the coldest parts of the fridge.
-
Page 12: Notes On Using Your Fridge
NOTES ON USING YOUR FRIDGE ALWAYS Cover and wrap foods, especially if they are PUNGENT. DO NOT place paper or plastic on the shelves which would • block the flow of air through the grids. NOTE: At the maximum cold setting, with a high outside (ambient) temperature and well-stocked (full or nearly full) compartments, the Fridge’s operation may be continuous, leading to the formation of some frost on the evaporator. -
Page 13: Cleaning And Maintenance
CLEANING / MAINTENANCE NOTE: Before attempting to clean your appliance, UNPLUG IT and make sure you do the following: WE RECOMMEND THAT YOU CLEAN AND MAINTAIN YOUR REFRIGERATOR ONCE A MONTH. Pay particular attention to the sealing rubber bars of the doors. These need to be kept clean for hygienic reasons as well as to allow the door to close properly. - Page 14 CLEANING / MAINTENANCE HOW TO CLEAN THE CONDENSER – the condenser consists of a coil structure at the back of your freezer. To clean it, carefully follow the following instructions To optimize the operation of the appliance and to save energy you should periodically clean the dust from the condenser at the back of the appliance.
-
Page 15: Defrosting / Tips For Saving Energy
Do not remove the drain pan while cleaning it! DEFROSTING Defrosting occurs fully automatically in the refrigerator compartment during normal operation. The defrosted water collected by the evaporating tray evaporates automatically. TIPS FOR ENERGY SAVINGS Try not to open the door too often, especially when the weather is wet and hot. -
Page 16: Installing Your Fridge
INSTALLING YOUR BR16.2A REFRIGERATOR NOTE – YOU NEED THE SPACES SHOWN HERE TO INSTALL YOUR APPLIANCE. NOTE: Ensure there is sufficient space (36mm) behind the cooling coils at the back of your Fridge. NOTE: Ensure that you are going to be placing your fridge away from heat sources and in a well-ventilated position. - Page 17 INSTALLING YOUR APPLIANCE- CONTINUED Fitting Bar Install the Fitting Bar (shown in the picture below), so that it attaches to the top of the appliance and underneath the top of the cabinetry, indicated by the arrow: *Please be aware that the Fitting Bar is not attached to the appliance and needs to be secured during installation.
-
Page 18: Fitting The Décor Door
INSTALLING YOUR BR16.2A REFRIGERATOR Widely open the fridge door Fitting the Décor Door - & hold it against the kitchen unit door. 2) Fix the slide guides (attached in a plastic bag along with the screws ST 4.2 x 9.5) to the edge of the door. - Page 19 INSTALLING YOUR BR16.2A REFRIGERATOR Fix the slides, being careful not to move them while fixing them into place (Fig. 4, at left). Fix the slide guides to the original position. Close the door and check the gasket (it should not be creased).
-
Page 20: How To Reverse The Door Swing
Reversing the Swing of the Door Reversing the swing of the Door Replace the fastener (6) and the washer (5) in reverse order into the opening of the lower hinge on the opposite side of the appliance. Take off all door corners (8 &... -
Page 21: Troubleshooting
Troubleshooting seal can be stretched and ‘fluffed’ outward. Trace a problem using the table below instead of having to call for help. PROBLEM WHAT TO DO CHECK THAT THE PLUG IS WELL-INSERTED INTO THE POWER SOCKET CHECK THAT THERE IS POWER FROM THE MAINS – THERE MAY BE A BLACKOUT OR YOUR FUSES MAY HAVE BLOWN. - Page 22 FLOWING. THIS IS NOT A MALFUNCTION. PROBLEM WHAT TO DO IN THE UNLIKELY EVENT THAT ICE DOES FORM ON THE INNER BACK WALL, IT SHOULD BE MANUALLY REMOVED WHEN IT REACHES 3-5MM THICK, USING ICE FORMATION ON THE INNER REAR A PLASTIC SCRAPER.
-
Page 24: Conditions Of Guarantee
*In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date. - Page 25 Baumatic Ltd Make-up for your kitchen Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax...