After Use; Optional Accessories - Makita LS1219 Instruction Manual

► 1. Brush holder cap
After replacing brushes, plug in the tool and break in brushes
by running tool with no load for about 10 minutes. Then check
the tool while running and electric brake operation when
releasing the switch trigger. If the electric brake is not working
correctly, have the tool repaired by a Makita service center.

After use

After use, wipe off chips and dust adhering to the tool with a
cloth or the like. Keep the blade guard clean according to the
directions in the previously covered section titled "Blade guard".
Lubricate the sliding portions with machine oil to prevent rust.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
Makita Europe N.V.
Makita Corporation
www.makita.com

OPTIONAL ACCESSORIES

WARNING:
These Makita accessories or attach-
ments are recommended for use with your Makita tool
specified in this manual. The use of any other accesso-
ries or attachments may result in serious personal injury.
WARNING:
Only use the Makita accessory or
attachment for its stated purpose. Misuse of an acces-
sory or attachment may result in serious personal injury.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Steel & Carbide-tipped saw blades
• Vertical vise
• Horizontal vise
• Crown molding stopper set
• Dust bag
• Triangular rule
• Hex wrench
• Hex wrench (for LS1219L)
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
885618B222
EN
20190209