GE LOGIQ S8 Service Manual page 249

GE H
EALTHCARE
D 5394227, 12
IRECTION
5-7-1-6 FibroScan Touch Panel
Preset Parameter
M or XL
CAP
FibroScan Report
Delete
Measurement
5-7-1-7 FibroScan Warning indicator
The following indicators display above the elastogram.
Figure 5-15 FibroScan Touch Panel
Press M to activate M+ probe. Press XL to activate XL+ probe.
Note: If only one FibroScan probe is connected, the exam type is
automatically activated when entering the FibroScan mode.
Activate the CAP measurement when the CAP option is installed.
Note: If the CAP option is installed, the CAP button is automatically activated
when entering FibroScan mode.
Activate FibroScan Report page.
Delete a group of measurements in an exam.
Move right or left to advance through measurement results.
Figure 5-16 Warning indicators
Section 5-7 - Hardware Options.
LOGIQ S8/LOGIQ E8 S
Description
1.No compatible probe connected
2.Electromagnetic disturbances
3.Calibrate the probe
M
ERVICE ANUAL
5 - 23