Honda HondaJet HA-420 Pilots Operating Manual page 299

HA-420
POM
Trim Panel
Check the trim panel in accordance with the AFM.
Refer to AFM Section 5, Takeoff Pitch Trim Settings, and set the pitch
trim for takeoff.
NOTE The pitch trim green band varies based on flap setting. If
planning to conduct the takeoff with flaps UP, the pitch trim
will be in the green band at this time. If planning to conduct
the takeoff with flaps TO/APPR, set the trim using the
digital display of trim setting. Verify the trim is set in the
green band during the Before Taxi checklist.
Standby Instrument
Verify the standby instrument has powered on, completed its alignment,
and displays valid data. Use the baro knob to set the current altimeter
setting.
Exterior Lights
When left in the default (NORM) position, exterior lights illuminate
automatically based on time of day and phase of flight. When the
exterior lights are in NORM, lighting items contained in the checklist
may be checked as complete without any other pilot action. If desired,
manual operation of the lights is possible through the CDU. In this case,
the EXT LIGHTS MAN OFF
lights are commanded off when the automation would have switched it
on.
NOTE If powering up on battery power, most exterior lights will
not be functional until a generator comes online.
October 30, 2016
Honda Aircraft Company
advisory CAS will post if one or more
HJ1-29000-005-001
FOR TRAINING PURPOSES ONLY
OPERATING PROCEDURES
AND TECHNIQUES
3-13