Honda HondaJet HA-420 Pilots Operating Manual page 129

Honda Aircraft Company
HA-420 SYSTEMS
POM DESCRIPTION
Indications
Trim, speed brake and flap information is displayed at the bottom of the
ASI.
Figure 1-61. ASI Secondary Flight Control Display
Pitch trim position is displayed in both analog and digital form. One
pointer is displayed for each tab. The digital value is the average of the
two tab positions. On the ground, a takeoff green band is displayed
along the axis and the pointers, and value changes color from white to
green when the trim is set within this band. In air, the pointers and value
are displayed in white. If a trim actuator has failed, the associated trim
pointer is displayed in amber. A white STBY icon is displayed when the
trim is operating in the standby mode.
Roll and yaw trim position is displayed in analog form with a pointer for
each tab. The pointers are white except when centered on the ground in
which case they are green.
Flap position is displayed as a white pointer. If the flap position does not
match the commanded position, a white box is shown around the selected
HJ1-29000-005-001
October 30, 2016 1-113
FOR TRAINING PURPOSES ONLY