Connect / Disconnect Relay Outputs - Honeywell Esser 2 Series Operation And Installation Instruction

Extinguishing Control Computer 8010 - Series 2

12.6 Connect / disconnect relay outputs

The relay outputs (1–13) can be switched on or off via the function keys and the 10-button keypad of the control
panel. For operation, the keypad must be enabled via the key-switch.
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
Test operation
Un-
Extra releasing 1
locked
Outputs
Alarm
Fig. 9: Operation example – Switching off relay output No. 7
The deactivated relay output is shown in the zone display with the continuously yellow LED. The green LED
>Outputs< also lights up to indicate that the zone display is showing the status of the outputs.
The zone display can be switched between the display of the 13 zones and of the 13 control outputs with the
function key >Switchover<. If the keypad is locked, the status of the zones is always automatically shown, even
if outputs have been deactivated.
Press the following key combination to switch on and reset the detector zone:
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
Test operation
Un-
locked Extra releasing 1
Outputs
Alarm
Fig. 10: Operation example – Switching on the relay output No. 7
The continuously illuminated LED in the status display of the output turns out. The relay output is switched on
and will be activated in the case of an event.
Deactivated outputs will not notify an alarm message in case of a fire!
72
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
Output
7
Test operation
Extra releasing 1
Outputs
Alarm
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
Output
7
Test operation
Extra releasing 1
Outputs
Alarm
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
Off
Test operation
Extra releasing 1
Outputs
Alarm
In operation
Extinguishing system
enabled
Extinguishing system
activated
Emergency release
Switching off
On
Test operation
Extra releasing 1
Outputs
Alarm
Detector zone
1 2 3 4 5 6 7 8
9 10 11 12 13
Fire/Switch off/Trouble
Detector zone
1 2 3 4 5 6 7 8
9 10 11 12 13
Fire/Switch off/Trouble
FB 798352 / 11.07