Compatible Panels And Devices; Panels; Power Supplies; Solenoid Polarizing Relays - Honeywell XLS-REL Technical Reference Manual

Compatible panels and devices

XLS-REL Technical Reference Manual

Panels

The XLS-REL is compatible with XLS100 and XLS1000 fire
alarm control panels. You may install the XLS-REL in any of the
following enclosures:
• XLS-WB(X) series
• RACCR series
• 3-RCC series
• 3-CAB series
• MFC-A
Note: Maintain a 1-inch (25.4 mm) minimum clearance all
around the XLS-REL. The clearance space must also comply
with the National Electrical Code.

Power supplies

The XLS-REL is compatible with the following power supplies:
• 2-PPS(-220)
• 2-PPS/6A(-220)
• SIGA-APS(-220)
• 3-BPS/M(-220)
• 3-PPS/M(-220)
• XLS-BPS6(-220)*
• XLS-BPS10(-220)*
*Not compatible with FMRC sprinkler applications that require
90 hours of standby.

Solenoid polarizing relays

Use the RELA-EOL with the XLS-REL. For more information,
see the RELA-EOL installation sheet.

Abort stations

The XLS-REL is only compatible with normally-open,
momentary-action abort stations. Abort stations must be listed
with the appropriate agencies in your area. See Listing agencies.

Service disconnect stations

The XLS-REL is only compatible with listed service disconnect
stations that are normally-closed (minimum 2.0 Amps). Service
disconnect stations must be listed with the appropriate agencies in
your area. See Listing agencies.
Installing the XLS-REL
1.5