Safety Notes - Motorola IXP-9120 Reference Manual

Safety Notes

This section provides safety precautions to follow when installing, operating, and maintaining
the IXP/CPCI-9120 and all sub-boards.
We intend to provide all necessary information to install and handle the IXP/CPCI-9120 in
this Reference Guide. However, as the product is complex and its usage manifold, we do not
guarantee that the given information is complete. If you need additional information, ask your
representative.
The IXP/CPCI-9120 has been designed to meet the standard industrial safety require-
ments. It must not be used except in its specific area of office telecommunication industry
and industrial control.
Only personnel trained by Motorola ECC or persons qualified in electronics or electrical
engineering are authorized to install, maintain, and operate the IXP/CPCI-9120. The
information given in this manual is meant to complete the knowledge of a specialist and
must not be taken as replacement for qualified personnel.
EMC
The board has been tested in a standard Motorola ECC system and found to comply
with the limits for a Class A digital device in this system, pursuant to part 15 of the FCC
Rules respectively EN 55022 Class A. These limits are designed to provide reasonable
protection against harmful interference when the system is operated in a commercial,
business or industrial environment.
The board generates and uses radio frequency energy and, if not installed properly and
used in accordance with this Reference Guide, may cause harmful interference to radio
communications. Operating the system in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.
If you use the board without a PMC module, cover empty slots with blind panels to
ensure proper EMC shielding. If boards are integrated into open systems, always cover
empty slots.
IXP/CPCI-9120 23